$100,000,000.00
Test
Sunix USB2312 USB 3.1 Enhanced SuperSpeed Dual ports PCI Express Host Card with Type-A Receptacle
PCI Express Base Specification Revision 2.0 dual-lane (x2).
Compliant with Universal Serial Bus 3.1 specification Gen2.
Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1.
Supports simultaneous operation of multiple USB 3.1, 3.0, USB 2.0 and USB 1.1 devices.
Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps.
Expands dual external USB 3.1 Super-Speed plus Type-A ports on the system.
USB port supplies maximum +5VDC / 900mA power output to USB device.
Specifications
Hardware
BUS PCI Express Spec 2.0, Dual-Lane (x2)
Controller PCI Express USB 3.1 Host controller, Asmedia ASM1142
USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1
IRQ IO Assigned by System
USB Communication
Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
Speed SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps)
No. of Port 2-port
PCB Connector USB 3.1 USB Type-A port
Protection ±15KV IEC61000-4-2 Air Gap Discharge
±8KV IEC61000-4-2 Contact Discharge
Power
Source PCIe Bus Power
Output Capacity USB Type-A Port:
+5VDC / Maximum 0.9A / each port
Note: Total power output capacity will be limited by system power supply.
Over Current Protection USB Type-A Port:
+6VDC / 1.1A / each port / PTC Fuse
Power Consumption 1.1 W @ 3.3V (board only without power output to USB device)
Driver Support
Windows Windows 7 (X86/X64)
Windows 8.x / 10 (X86/X64) (Windows in-box driver)
Linux Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver)
Environment
Operation Temperature 0 to 60°C (32 to 140°F)
Operation Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)
Regulatory Approvals
EMC CE, FCC, VCCI, BSMI
Green RoHS, CRoHS, WEEE
Physical Characteristics
PCB Dimension 79.3 x 68.5 mm
Bracket Standard 120 mm (Low Profile 80mm)
Bracket Space 1
Reviews
There are no reviews yet.